Description
The Vivarium Electronics Model VE-200 can handle 700 watts of devices. The VE-200 also displays the high and low-temperature readings on the display, as well as the current temperature the probe reads, and the temperature the thermostat is set for. The Vivarium Electronics Model VE-200 can function as a pulse proportional or on/off thermostat.
The VE-200 features include:
- Convenient tabletop mounting
- Full back-lit display
- Displays probe temp and set point on the main display
- Hi/Lo History
- Night Drop capability (ND Module Required)
- Dimming Capability
- Remembers settings during power failure
- Built-in Safety Shutoff relay
- A grounded receptacle designed for outlet strip use
- 700 watt capacity with user replaceable fuse (Spare fuse included!)
- 10′ probe cord
- User-replaceable 6′ Power Cord
- Multiple units can be stacked
- Pulse Proportional OR On/Off capable
This thermostat is a tabletop model designed to sit on top of your racks. The single outlet is expandable with a power strip. The standard display shows the current setpoint value, the current time of day, and the current probe temperature reading.
The keyboard is easy to navigate through the menu and the back-lit display makes programming easy and intuitive. These thermostats stack on each other for a clean and, professional appearance. Both the probe and fuse are easy to replace when necessary. The probe cord locks into place preventing an accidental disconnect. 6′ power cord and probe are included.
FAQ
A thermostat works just like the thermostat in your home.
It keeps the heat in your tubs at a pre-set temperature. If you had no thermostat on your home heating system you would bake yourself and burn out the heating element much faster.
There are 2 different types of thermostats.
- On/off thermostat. This type lets the heat tape get to just above the set temp then shuts off. When the temp of the heat tape falls below the set temp the thermostat will send power to the heat tape until it heats up again.
- Proportional. This type sends small pulses to the heat tape to keep the temp a bit more steady( which is not as crucial for rack systems but you should definitely use a proportional thermostat for incubators)
All thermostats do the same thing, control the heat.
Some have more options we like to call “bells and whistles”. They are not required but some people like them. Examples are Hi/Lo alarms, night drop, etc.
A thermostat must be used to control the heat in our rack (or any rack system).
You can use one thermostat for multiple of the same rack system (up to the wattage capacity of the thermostat) but not for 2 different rack systems (unless the thermostat has 2 or more probes like the Vivarium VE 300 X2). For example, you run up to 6 of our sub-adult racks safely on one Vivarium VE 200 (700 watt capacity) since our sub-adult rack uses approximately 100 watts per rack. But you should not run a Vivarium Ve 200 for 2 of our sub adult racks and 2 V70 racks as the tub characteristics are different and they also use different wattage heat tape. But The Vivarium VE 300 X2 has 2 probes and therefore can run 2 different rack systems.